无锡市兴百利机械设备有限公司

方型钢板仓Square steel plate warehouse

容 积: 5-500立方/单个

钢板厚度：2-8mm

料仓结构：组合式

-仓内配有温度检测传感器。

-仓内配有水分检测传感器。

-仓内配有高压送风管道。

-仓内配有跌落机构，防止物料高空跌落摔碎。

-仓内壁设有垂直爬梯，爬梯有安全防护笼。

-仓内配有阻旋式上下料位感应装置。

-仓底部出料口配有电动插板阀控制流量。

-仓顶带盖板密封，并配有除尘管道。

-仓顶部有平台,平台表面铺设3mm波纹防滑花纹板，平台四周有安全防护栏杆。

-方仓锥底易磨损部位采用锰钢耐磨板，上下部位设物料观察孔，并有阻旋式上下料位感应装置，使整套设备达到自动控制功能。

-仓内焊缝平滑，密封性自流性良好、无漏焊、加渣及烧穿现象，没有滞留物料流动的死角，无残留，无需人工清理。

Volume: 5-500 cubic meters / single

Steel plate thickness: 2-8mm

Silo structure: combined type

-Temperature detection sensor is equipped in the bin.

-The warehouse is equipped with moisture detection sensor.

-The warehouse is equipped with high-pressure air supply pipe.

-The bin is equipped with a falling mechanism to prevent materials from falling and breaking.

-The inner wall of the warehouse is equipped with a vertical ladder with a safety cage.

-The bin is equipped with an up and down material level sensing device.

-The discharge port at the bottom of the bin is equipped with an electric gate valve to control the flow.

-The top of the bin is sealed with a cover plate and equipped with a dust removal pipeline.

-There is a platform at the top of the warehouse, 3mm corrugated anti-skid checkerboard is laid on the surface of the platform, and safety guardrails are set around the platform.

-Manganese steel wear-resistant plate is used for the easily worn part of the cone bottom of the square bin, and the upper and lower parts are provided with material observation holes, and there is an anti rotation up and down material level sensing device, so that the whole set of equipment can achieve the automatic control function.

-The welding seam in the warehouse is smooth, with good sealing and self fluidity, no missing welding, slag addition and burn through, no dead angle of retained material flow, no residue, and no need for manual cleaning.